Sublimation Lighter White

Sublimation Lighter White

This lighter does not come with fuel.
Sublimate your own personalized lighter.

Instructions:

1. Using sublimation paper and sublimation ink, print a mirror image small enough to sublimate on this blank.
2. Paste the image to be printed on the blank with thermal tape.
3. Press the image on the white side of the blank at 360°F (182°C) on the heat press for 180 seconds.
4.Use 380°F (193°C) in the oven for 6 minutes, turn around after 3 minutes.

NOTE:
The recommended settings above may need adjustment for best results. Settings will vary based on heat press make and model, ink and media, and atmospheric conditions.
The substrate must be at room temperature.